Charles Sharp PIPES MD Pipe Carver from New Mexico

Squat Bulldog Brown stain finish Diamond shank and bit w/ antler accent. Dimensions as follows 5-3/4"Long

1-1/2" Tall,2-1/8" Wide, 1-1/2" Deep, with a 3/4" Tapered Drilling.

$185

Matte finish Slightly bent Natural rough top Billiard. It is 5-5/8" Long, 2-1/4" Tall, 1-3/8" Wide, 1-3/4" Deep and has

a 3/4" Tapered Drilling.

This pipe has a very tight Straight graining all the way around the bowl and a Ebonite stem. Weight is 44Gms.

$115

Freeform Egg w/ Ebonite extention and Hand Made Ebonite fancy stem Natural Matte Finish Dimensions as follows 6-1/8" Long, 2-1/2" Tall, 1-1/2" Wide, 2" Deep, with a 3/4" Tapered Drilling.

$120

pot with a slight bend in the stem and 2 rings cut into the top to accent the top. Measurements for this pipe are as follows 5-1/2" Long,1-7/8" Tall, 1-15/16" Across the top, 1-1/2" Deep with a 3/4" Tapered drilling. The Accent on the

shank is Olivewood, and the stem is Hand cut Ebonite

apple shapted Hawkbill. A fine cool smoke with a real nice straight grain. Super looking pipe. This pipe is 6-1/16" Lg

2" Tall, 2" Wide, !-5/8" Deep with a Tapered 1" Drilling also a turned in Top. Pipe has a Cocobolo Accent and a Hand cut wide stem

for comfort made of Cumberland Material. Great graining superior shape and comfort weight 61 Gms.

Number 6 Is a Matte finish Slightly bent Natural rough top Billiard. It is 5-5/8" Long, 2-1/4" Tall, 1-3/8" Wide, 1-3/4" Deep and has

a 3/4" Tapered Drilling. This pipe has a very tight Straight graining all the way around the bowl and a Ebonite stem. Weight is 44Gms.

RUSticated Brandy 1/2 Bent Large Pipe Handcut Ebonite stem. Dimensions are 5-15/16" long, 2-1/2" Tall,

1-9/16" Wide, 2-1/16" Deep, and has a 3/4" Tapered Drilling

S140

CHARLES SHARP Carving Pipes for half a Century!! `"Welcome! Since you’re reading this then you must share my passion for fine pipes and tobacco – a love affair, influenced by my grandfather, which started well over fifty years ago. When I think about it now, it’s actually hard to remember a time when I wasn’t a pipe smoker.` WRITE ME AT chazpipesmd@yahoo.com thru AUGUST 30th , 2010 all pipes will be given a 30% Discount.
Modern Dublin--5-5/8" Long, 1-5/8" Tall, 1.9" wide at top,1.530" Deep With 3/4" Tapered drilling. Weight 45 Grams $225

Freeform Snail with a Hand cut Cumberland stem, and has an accent of Honduran Rosewood. Also a rough root top. It is 6-1/16" Long, 1-3/4" Wide,2-1/2" Tall from the swewep on the bottom to the top,2" Deep and has a Tapered 3/4"
Weight 64 Gms $195.00

	Squat Bulldog Brown stain finish Diamond shank and bit w/ antler accent. Dimensions as follows 5-3/4"Long 1-1/2" Tall,2-1/8" Wide, 1-1/2" Deep, with a 3/4" Tapered Drilling. $185
	Matte finish Slightly bent Natural rough top Billiard. It is 5-5/8" Long, 2-1/4" Tall, 1-3/8" Wide, 1-3/4" Deep and has a 3/4" Tapered Drilling. This pipe has a very tight Straight graining all the way around the bowl and a Ebonite stem. Weight is 44Gms. $115
	Freeform Egg w/ Ebonite extention and Hand Made Ebonite fancy stem Natural Matte Finish Dimensions as follows 6-1/8" Long, 2-1/2" Tall, 1-1/2" Wide, 2" Deep, with a 3/4" Tapered Drilling. $120
$125 stem is Hand cut Ebonite. This is a real nice pipe for a quick smoke and has great graining all the way around the bowl. Weight of this pipe is 51 Gms.	pot with a slight bend in the stem and 2 rings cut into the top to accent the top. Measurements for this pipe are as follows 5-1/2" Long,1-7/8" Tall, 1-15/16" Across the top, 1-1/2" Deep with a 3/4" Tapered drilling. The Accent on the shank is Olivewood, and the stem is Hand cut Ebonite


$175 FREE FORM Great Shape and Grain!


apple shapted Hawkbill. A fine cool smoke with a real nice straight grain. Super looking pipe. This pipe is 6-1/16" Lg 2" Tall, 2" Wide, !-5/8" Deep with a Tapered 1" Drilling also a turned in Top. Pipe has a Cocobolo Accent and a Hand cut wide stem for comfort made of Cumberland Material. Great graining superior shape and comfort weight 61 Gms. Number 6 Is a Matte finish Slightly bent Natural rough top Billiard. It is 5-5/8" Long, 2-1/4" Tall, 1-3/8" Wide, 1-3/4" Deep and has a 3/4" Tapered Drilling. This pipe has a very tight Straight graining all the way around the bowl and a Ebonite stem. Weight is 44Gms.	$195

Tall Danish style: 4.5" Tall, 1-3/8 Wide at Top, 5-1/2" Tall ,2.8" Deep, 3/4 Tapered Drilling. Weight 57 Grams $225
RUSticated Brandy 1/2 Bent Large Pipe Handcut Ebonite stem. Dimensions are 5-15/16" long, 2-1/2" Tall, 1-9/16" Wide, 2-1/16" Deep, and has a 3/4" Tapered Drilling S140



You can invest in any of these fine pipes with a Credit Card ,PAYPAL or Postal Money Order. Write me today and I can send you a PayPal Link today!!



	Write ME at chazpipesmd@yahoo.com
`After many years in the Tool and Die trade an opportunity presented itself that allowed me to mix my love for pipes and tobacco and the skills that I had accumulated. In 1971 an existing retail tobacco shop in the Eastern United States came up for sale – it seemed like the stars had lined up – I had to give it a try`	`The shop came with a pot belly stove and some pretty interesting clientele – actors Paul Newman, Robert Redford, Jason Robards and Sterling Hayden, talk show host Jack Parr, and singer song-writer Neal Sedaka where were among my regular customers. They seemed to be attracted to the pot belly stove and weren’t averse to spinning a yarn or two - Jason Robards was an especially great story teller. It was a very enjoyable time in my life. It was also very educational.`


*SEE MORE SHARP PIPES HERE*
SEE MORE HandMade Sharp Pipes CLICK HERE I take PayPal and can send you an Invoice for any Pipe you would like. You can also use a Credit Card even if you are NOT a member of PayPal

CHARLES SHARP PIPES chazpipesmd@yahoo.com Write me today and I can send you a PayPal Link today!!





	Squat Bulldog 5-5/8" Long, 1-1/2" Tall, 2-1/8" Wide, 1-1/16" Deep 3/4" Tapered drilling. $160

With PayPal I can send you an Invoice and Mail the Pipe the very next day. With a Postal Money Order I can Mail the Pipe out as soon as I receive your letter

chazpipesmd@yahoo.com


After operating the store for a short while, I started to do pipe repairs. As my repair and restoration skills increased it was a natural jump to start crafting pipes for the shop as well. 20With my tool and die background and the wood working experience I had gained making furniture, I proceeded to design and make the tools that I felt I’d need to get started. Although I was fortunate to have a pretty interesting customer base, probably more important for my fledgling pipe making business, were the friendships that I made with those in the trade – Herman Lane of Lane; Milton Sherman, noted tobacconist and author (his book “All About Tobacco” although out of print is still widely quoted to this day); pipe-maker Bill Craig – who gave me some of his equipment and, more importantly some great advise; and, lastly, Tim West, noted pipe-maker and restorer (though we’ve never met in person, Tim, through countless emails and phone conversations, was and still is a very valued resource). Having the shop also afforded me the opportunity to study the work of some of the world’s great pipe crafters

WRITE ME TODAY at chazpipesmd@yahoo.com

WRITE ME TODAY at chazpipesmd@yahoo.com

The more pipes I made the more that I wanted to continue to make – it really was the perfect outlet for my life experience. My art background served me well with the design aesthetics, and the tool and die background in the all important engineering necessary for a great smoke. My first efforts met with success and caught on well in the store – they soon began to outsell my regular brands. It wasn’t long before I was seeing new customers in the store requesting my pipes - referrals from my regular customers. Word of mouth spread to mail orders –what started as a trial with a few pieces of briar now turned into buying it by the bag load. It got to the point that I had to move my pipe crafting from the backroom of the store to the basement of my house.	`In 1981, after being in business for ten years I sold the shop, but I couldn’t walk away from pipe making – I loved it too much and it had become an important part of my life. For the past 20 plus years I have continued to craft pipes as well as repair and refurbish other fine brands – selling the ones I make by word of mouth.` ASK ME ABOUT MAKING A SPECIAL DESIGN PIPE FOR YOU. RECEIVE A PIPE OF THE SAME QUALITY OF WELL KNOWN CARVERS AT ABOUT HALF THE PRICE! WRITE ME AT chazpipesmd@yahoo.com


SEE MORE SHARP PIPES CLICK HERE


I accept PayPal and Postal Money Orders for next day mailing of Pipes. I accept personal checks and other Money Orders but must wait 8 business days for them to clear . REQUEST A CUSTOM STYLE PIPE and I can usually have it made in 10 to 14 days.
WRITE ME TODAY at chazpipesmd@yahoo.com